Silentmax® acoustic panels are made of fine PET fibres. They are anti-static against dust and virtually maintenance-free. They can be cleaned with a dry or wet vacuum cleaner. They are lightweight, breathable, vapour permeable, chemical resistant. They are fixed to the wall using corner strips, Velcro, gluing or anchoring with spacing screws. They are fixed to the ceiling by gluing or by means of suspension cables.

Basic characteristics

Dimensions: 2440 mm x 1220 mm, thickness 12mm
Weight: 6,9 Kg / panel ( 2,3 Kg / m2)
Dimensions can be easily adjusted with a folding knife.

Silentmax acoustic panels for effective echo reduction and noise reduction

Sound absorption parameters

They are characterised by excellent acoustic absorption over a very wide range of frequencies. The absorption coefficient NRC=0.9 in the frequency range of the spoken word 500 Hz to 5 kHz. The NRC depends on the location of the panels in the space and their configuration.

Tested by accredited laboratory ITC Zlín

NRC 500-5000 Hz0,90
Silentmax – NRC

Silentmax® acoustic panels are certified to EU and ASTM standards:

Thermal conductivity

Heat conductivity0,03687W/(m*K)
Thermal resistance0,3282m2*K/W
Determined according to ČSN EN 12667

Tested by accredited laboratory ITC Zlín

Medical harmlesness

According to Directive 2011/65/EU, it complies with these tested substances.
Does not contain heavy metals: lead, mercury, cadmium, hexavalent chromium, bromine.
Does not contain phthalates: PBB, PBDE, DEHP, BBP, DBP, DIBP
Tested by an accredited ITC Zlín laboratory


The classification of reaction to fire according to ČSN EN 13501-1:2019 is C-s1, d0
ČSN EN ISO 11925-2 (exposure 30 s) B to D, D2 to group B S2, d0.
ČSN EN 13823 FIGRA-C; THR-B; SMOGRA-S1; TSP-S1; flaming drops-no (d0).
Tested by the Institute of Civil Engineering CSI in Prague


Silentmax® acoustic panels are made from recycled PET fibers with a thickness of 18 to 22 µm. The fibers are pressed under a strictly defined temperature and pressure so that the fibers melt and join at the point of their mutual contact. The internal structure and precisely defined density (the ratio of fibers, their gaps, the free space between them) predetermine the property of extreme acoustic absorption.


We can print Silentmax® acoustic panels with any motif according to the customer’s wishes. A company logo, photo or motif on the acoustic panel improves the acoustics and at the same time functions as an aesthetic accessory. The print does not degrade the acoustic properties. The color has a very high viscosity, thanks to which the individual color droplets surround the 20um thick fiber. The structure of the fibers is thus still active even with the print.


Modern 3D acoustic panels have almost 2.4 times the active area of a single panel. To optimize shipping costs, we ship these as a simple building kit. Read more about Silentmax3D acoustic panels here.


  • by hanging on the wall
  • using corner rails
  • by hanging from the ceiling
  • by gluing
  • by laying (partition, divider)


Technický list
Brožura A4
Brožura A4 skládaná
EN – Technical sheet
EN – Brochure A4

Certificates – CS

NRC-činitel zvukové pohltivosti dle ČSN EN ISO 11654
Zdravotní nezávadnost
Protokol o ověření typu výrobku 785200108/2022
Stavební technické osvědčení č.STO-AO224-1261/2022
Klasifikace reakce na oheň v souladu s ČSN-EN 13501-1:2019
Stanovení zapalitelnosti podle ČSN-EN 11925-2
SBI test – reakce na oheň podle ČSN-EN13823
Stanovení šíření plamene po povrchu stavebních hmot dle ČSN 73 0863

Certificates – EN

NRC-sound absorbtion coeficient acc. to ČSN EN ISO 354, 11654
Medical harmlesness test
Construction technical approval No. STO-AO224-1261/2022
Classification of reaction to fire accordance with ČSN-EN 13501-1:2019